We have a limited supply in of classic MK-III driver boards. They can be found here.

Kits! We have a new category, which includes a ST-70 driver kit and repair/upgrade kit in stock. Stock is very low at this time, so grab the first bach while they're here.

Launch of our N.A.B.S. series cables delayed due to a "speed-bump" in the supply line. Our apologies.

Happy New Year! We have released the CVD designed DynaMutt ST-70 driver PCB's in both octal and noval versions here. Intro pricing for January (or while first-run quantities last) only!

We have added some backup emails, as sometimes our main mail server is flakey. Check the contact page for them.

Valve heater/filament regulator PCB's with soft start now available! Check them out here.

Power Line Filter Boards - we have regular stock in of these great boards that wring the junk out of the AC line! Check them out here.

An info page on our interpretation of the famous ST-70 affectionately called DynaMutt has been added to the builds page.

* NOTE *

It has come to our attention that there is a spam going around claiming to have some download from classicvalve.ca - DO NOT FOLLOW THAT LINK, it is not us or from us.

These are viruses that are in the wild looking to reproduce. Our servers are not infected. We have contacted the authorities involved and hope to have this spam resolved soon.

A new Dynaco ST-70 power supply PCB has been added to the lineup. Our design has "failsafe" bias and balance controls.

The last of the power line filter "ooops" boards are in stock. Grab 'em now before they run out and the deal is gone!

Our server crashed, but we have returned! We have a little more organization to our site for PCB's and have added a new one, the fabulous ST-70 driver from KTA HiFi here.

We have restock of the following items: 9-Pin Experimenter PCB's, Tag Board, Perf Board, Turret Board and Large Turrets.

A very busy week has seen us go out of stock of many items. Our apologies and we will restock as soon as possible. Usually 2-3 weeks from our supplier.

We will be attending the diyAudio Festival in Victoria, BC and will be unable to respond to emails from August 20^th through August 25^th. See you when we return!

More PCB's added as well as a clearance/surplus section for PCB's we have on hand that just didn't make the cut for the regular page, but are perfectly good with a few minor oopsies (with notes). BIG savings found here!!!

CCS printed circuit boards are now back in stock! Grab some and get stock ahead of everyone else for the fall projects lineup.

We will be out of town for a few days and return late on the 5^th. We'll get back to you ASAP!

New accessories and parts available! We have individual high quality turrets and an addition to our capacitor lineup and we're also offering overstock on resistors here, which will be added to over time.

More printed circuit boards available! We have the Universal Driver PCB's designed by Peter Millett available, as well as a high quality perf board.

A new product for your HiFi or guitar amp/preamp projects, tagboards.

Turret boards are back in stock here after breifly being out.

More printed circuit boards available! We have added Dynaco ST-70 clone PCB's of one of the most famous amplifiers in history. Also, a new experimenter PCB added to the lineup.

Need 1/4" or 7/16" plate/grid caps? We got 'em!

Sale ended on CCS PCB's, a new one begins! 10% off all parts (excluding PCB's and turret board) until March 1^st.

As announced previously, all our prices are now in US dollars. A couple things went up, most went down, some stayed the same. You still get a great deal, I still get to eat. Everyone's happy :-)

---

Our special introductory offer of any CCS PCB for 4 for the price of 3, like the experimenters set, continues until February 14^th.

---

Two new PCB introductions - CK-7 and CK-26 Tube Gain Stage and Buffer PCB and Tube mu-Follower PCB.

Due to the instability of the Canadian dollar and the fact we have to import more and more items from outside the country and pay in USD, as of February 1st, all prices will be switched to the more stable US dollar.

---

Canada Post has had some price increases. When we ship small items to you, you will still pay only our cost + $0.50. Large parcels will be cost + maximum $5.00, depending on complexity of packaging needed.

---

Updated our products page.

---

As a special introductory offer for our CCS PCB's, we will offer 4 for the price of 3, like the experimenters set, but you can chose all N-channel or all P-channel instead of 2 and 2 if you wish.

By popular demand, we have created Constant Current Source/Sink boards for your projects. See our PCB page under Parts.

We are going on a little weekend getaway from December 12th to 14th and will be unable to respond to email or orders during this time.

Price drop on some items! We have made an adjustment to our prices reflecting the stronger Canadian dollar for PCB's and sockets because we buy these items in US dollars.

Price adjustment on Chinook, PCB's, turret boards and sockets. Unfortunately we have had to increase prices on our Chinook amp, PCB's and sockets because we buy (or parts for) these items in US dollars.

Electronic parts for your projects! We've added more electronic parts as we've assessed our inventory.

Power supply PCB's for tube projects have been restocked. Very limited qualtity on hand. Grab 'em while they last!

Our shipment of PCB mount tube sockets have arrived. You can find them in with the tube PCB's in "Parts".

Welcome to the new Classic Valve Design! We have a new website for the new year in hopes of being able to simplify the navigation as well as present to you in a more coherent fashion our products an services.

Being XHTML 1.0 Strict and CSS2.1 compliant, this site itself will keep up with advancing browser technology.

We will also be terminating eBay sales February 20th. Basically, when the last round of auctions there are done, so are we with them. Check out our new eBid Store which is where we have moved most of our parts and will be continuing our consignment sales of tubes.